FA
Today, Friday، 29 Mar 2024 - 18:01
Mokhafaf

Acronym Finder

What is LBM ?

Laser Beam Machining

Laser beam machining as an abbreviation (SBM) is a filing method that results from the action of the focused laser beam on the material to be machined. In this process by transferring the photonic energy to the surface of the piece.thermal energy is generated by this heat at the site of laser radiation. the material is separated from the piece in the form of molten or vapor.< < > laser beam machining (SBM) is an unusual production of machining. A type of machining in yen laser is directed to the workpiece for machining. In this framework, thermal energy is used to remove materials from metal or non-metallic surfaces. The high frequency of monochromatic light falls on the surface of the Earth, and then heating - melting and vaporization of the material occurs due to collisions with photons. Laser beam machining is suitable for fragile materials with low conductivity ، but can be used in most materials.< < > the laser focusing system mechanism is similar to the laser welding system mechanism. Laser machining is divided into three main categories-one-dimensional laser machining-two-dimensional laser machining and three-dimensional laser machining.< < > one-dimensional laser machining is actually the same as laser drilling which is done only along the laser beam.machining. Two-dimensional machining includes laser cutting، laser grooving and laser marking, which laser cutting is the most widely used in this sector. In this method, it is possible to create a two-dimensional shape by cutting flat and flat parts in small thicknesses.< < > three-dimensional machining involves laser sharpening، laser milling and laser engraving, which in this method usually use two focused beams and cut out parts.< < > the laser machining process is very different from traditional machining. In traditional machining the basis of filings is based on the creation of mechanical stresses on the part wins on the parts but in laser machining, the basis of filings is based on the concentration of thermal energy on the workpiece.
LBM